Congress Lectures 2016
Tuesday 2016/05/03
| Free Paper: Prosthetics - Control Concepts | |
|---|---|
| Implantable myoelectric sensors for prosthetic control Evangelista, Melissa (US) | The Alfred Mann Foundation |
 |
| Proportional neuromuscular interface for anthropomorphic bioelectric prosthesis control Shchukin, Sergey (RU) | Bauman Moscow State Technical University |
|
| The first lower limb implantation of wireless myoelectric sensors into residual muscles of two patients with lower limb amputation Kristjánsson, Kristleifur (IS) | Össur |
|
| A novel approach for a sensitive prosthetic leg – A case study Salzmann, Stefan (AT) | University of Applied Sciences Upper Austria |
|
| Comparison of three TMR transhumeral cases Münch, Thomas (DE) | Münch + Hahn GmbH & Co. KG |
|
|
Keynote
Foot biomechanics in diabetes and off loading strategiesNester, Christopher, Prof. (GB) | University of Salford, School of Health Sciences |
|
| Symposium: Biomechanics of foot related disorders | |
| Biomechanical considerations for endoprosthetic fitting at the ankle joint Walther, Markus (DE) | Schoen Klinik München Harlaching |
|
| Biomechanical aspects of orthopaedic shoe fitting for forefoot complaints Stief, Thomas (DE) | Verein zur Förderung des Forschungsund Bildungsmanagements für die Orthopädieschuhtechnik in Deutschland e.V. |
|
| Footwear concepts for offloading to prevent foot ulcers in diabetes Bus, Sicco A. (NL) | University of Amsterdam, Academic Medical Center |
|
| Opening Ceremony | |
| Reception and moderation Lotz, Klaus-Jürgen (DE) | Bundesinnungsverband für Orthopädie-Technik |
|
| Welcoming Address Buhl-Wagner, Martin (DE) | Leipziger Messe GmbH |
|
| Welcoming Address Jung, Burkhard (DE) |
|
| Words of Welcome Hanspal, Rajiv Singh (BE) | International Society for Prosthetics and Orthotics (ISPO) |
|
| Oration Braatz, Frank (DE) | Private Hochschule Göttingen |
|
| Opening speech: Future challenges for P&O Lotz, Klaus-Jürgen (DE) | Bundesinnungsverband für Orthopädie-Technik |
|
Wednesday 2016/05/04
| Course: Amputation Surgery and Liners - Expectations of fittings with different liner techniques - Which should be used when? | |
|---|---|
| Amputation surgery of the lower extremity - Consequences for liner fittings Brückner, Lutz (DE) |
|
| Liner fittings from the prosthetics perspective Piro, Markus (DE) | Orthopädie + Vital Zentrum Piro GmbH |
|
| Amputation surgery, Liner Fittings - The Scandinavian approach Larsson, Gert-Uno (SE) | Central Hospital in Kristianstad Liners fittings - The Scandinavian Way Johannesson, Anton (SE) | Ortopedteknik AB |
|
| Symposium: Control of hand prosthetics: the latest advances | |
| Improved hand prosthetic experience through structured training and dexterous control Vujaklija, Ivan (DE) | Universitätsmedizin Göttingen |
|
| Bionic reconstruction of the upper extremity using TMR and IMES Aszmann, Oskar (AT) | Allgemeines Krankenhaus Wien |
|
| State of the art clinical treatments of arm and hand amputees Bertram, Boris (DE) | Klinik für Orthopädie und Unfallchirurgie, Universitätsklinikum Heidelberg |
|
|
Keynote
Future opportunities and challenges in the production of orthopaedic technology Schneider, Urs , Dr. med. (DE) | Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA |
|
| Symposium: Additive manufacturing - new manufacturing processes in technical orthopaedics? | |
| Additive manufacturing – What additive manufacturing techniques are suitable for orthopaedic technology? Gebhardt, Andreas (DE) | Fachhochschule Aachen |
|
| Limits and possibilities of selective laser sintering in orthopaedic technology Breuninger, Jannis (DE) | Elfenbein GmbH |
|
| Additive manufacturing technology in orthotics Kienzle, Christian (DE) | Pohlig Gmbh |
|
| An algorithm to design AFOs that can be produced with the additive manufacturing technique: What is the reproducibility? Creylman, Veerle (BE) | Thomas More |
|
| Symposium: Rehabilitation robotics | |
| Device-assisted neurorehabilitation - A robot is not only a robot! Rupp, Rüdiger (DE) | Universitätsklinikum Heidelberg |
|
| Exoskeleton indications for quadriplegics Kuhn, Daniel (DE) | BG Kliniken Bergmannstrost Halle |
|
| Clinical results of the arm rehabilitation robot ARMin Klamroth-Marganska, Verena (CH) | ETH Zürich |
|
| Indego exoskeleton technology; For mobility or exercise? Kandilakis, Casey (US) | Shepherd Center |
|
Thursday 2016/05/05
| Course: Knee disarticulation - State of the art | |
|---|---|
| Amputation surgery procedure for knee disarticulation and transcondylar amputations Greitemann, Bernhard (DE) | Reha-Klinikum Bad Rothenfelde, Klinik Münsterland der DRV Westfalen |
|
| Basic prosthetic and orthotic care & Biomechanical demands and a new type of adaptive socket system for knee disarticulation prosthesis Baumeister, Tim (DE) | Pohlig GmbH |
|
| Extremity preserving alternative to knee disarticulation Baumgartner, René (CH) Fischer, Matthias (CH) |
|
|
Keynote
Epidemiology of obesity and its effects Maurer-Wiesner, Susanne , Dr. med. (CH) | Adimed - Zentrum für Adipositas- und Stoffwechselmedizin Winterthur GmbH |
|
| Symposium: Issues of patient care in the treatment of obesity | |
| Report by a German center of obesity Prof. Dr. med. Arved Weimann, Klinik für Allgemein- und Visceralchirurgie - Klinikum St. Georg gGmbH |
|
| Requirements for prostheses for XXL patients Attenberger, Stephan (DE) | Zimmermann Sanitäts- und Orthopädiehaus |
|
| XXL components for heavy-duty leg prostheses – Overweight prosthesis wearers requirements and demand Pollmeyer, Maik (DE) | Orthopädie-Technik Münsterland |
|
| Stability of orthoses Sabbagh, Daniel (DE) | FIOR & GENTZ GmbH |
|
| Rehabilitation and assistance by medical supplies for patients with obesity Alexandrowiz, Malene (DK) | XXL-Rehab |
|
|
Keynote
Cosmetic socket technology Ortiz, Marlo (MX) | Ortiz Internacional S.A. de C.V. |
|
| Satellite-Symposium: Innovative socket technologies in lower limb prosthetics | |
| Transtibial prosthetics - How much should the socket cover? Becker, Jan (DE) | Bundesfachschule für Orthopädietechnik Dortmund |
|
| Socket designs for sports knee disarticulation prosthetics Kipping, Thomas (DE) | APT Aktiv Prothesen Technik |
|
| Modern socket technologies in transfemoral prosthetics Gawron, Olaf (DE) | Pohlig Orthopädie-Technik |
|
| Functional socket design for hip prosthetics Ortiz, Marlo (MX) | Ortiz Internacional S.A. de C.V. |
|
| Symposium: Current treatment concepts for paraplegia | |
| Treatment procedures and concepts for spinal cord injured patients in Germany Kalke, Yorck-Bernhard (DE) | RKU - Universitäts- und Rehabilitationskliniken Ulm GmbH |
|
| Which appliances can be used in the treatment of quadriplegics with respirators? Saur, Marion (DE) | Orthopädische Klinik Hessisch Lichtenau gemeinnützige GmbH |
|
| Assistive devices for quadriplegics and paraplegics Klees, Martin (DE) | Berufsgenossenschaftliches Unfallkrankenhaus Hamburg |
|
| Rehabilitation techniques for quadriplegics - What does the future bring? Rupp, Rüdiger (DE) | Universitätsklinikum Heidelberg |
|
Friday 2016/05/06
| Course: Challenges in partial hand prosthetics | |
|---|---|
| Funtional and aesthetic challenges in partial hand prosthetics Schäfer, Michael (DE) | Pohlig GmbH |
|
| Partial hand prostheses in the treatment of occupational accident patients in Italy Cutti, Andrea Giovanni (IT) | INAIL Centro Protesi |
|
| Enhancing the outcomes for partial hand amputees Miguelez, John (US) | Advanced Arm Dynamics Ryan, Tiffany (US) | Advanced Arm Dynamics |
|
| Powered partial hand prostheses – Analysis of the disabilities of the arm shoulder and hand (DASH) questionnaire of twenty five patients Mackay, Lewis (UK) | Touch Bionics Limited |
|
|
Keynote
Future of prosthetics and orthotics in neuro-orthopaedicsStrobl, Walter Michael , Prof. h.c. Dr. med. Univ. MBA (DE) | Krankenhaus Rummelsberg GmbH |
|
| Symposium: Measures to improve function in neuo-orthopaedics. What makes sense? | |
| Usability of a prosthetic ankle controlled by implanted myoelectric sensors Lechler, Knut (IS) | Ossur hf |
|
| On recent prosthetic advances using tactile feedback Dosen, Strahinja (DE) | UMG Göttingen |
|
| Improvement of robotic hand rehabilitation with surface EMG Kollreider, Alexander (AT) | Tyromotion GmbH |
|
| Roughly on including EMG control into the control of a finger robot for arm rehabilitation after stroke Turolla, Andrea (IT) | Fondazione Ospedale San Camillo IRCCS |
|
| Interdisciplinary outpatient clinic provides appropriate, individualised restoration of drop foot in chronic stroke patients Ernst, Jennifer (DE) | Universitätsmedizin Göttingen |
|
| Awards Ceremony | |
| Award of the Best-Paper-Prize and Prize for Young Professionals |
|
|
Keynote
Present development of university medical centers in Germany Kroemer, Heyo K. , Prof. Dr. (DE) | Universitätsmedizin Göttingen |
|
| Symposium: Innovative materials and fabrication techniques in prosthetics and orthotics | |
| Prosthetic fitting of amputees with 3D printed sockets Poziembo, Brad (US) | Dayton Artificial Limb Clinic |
|
| Parametric based prosthetic foot manufactured with selective laser sintering (SLS) Schmück, Hannes (DE) | Gottinger-Handelshaus OHG |
|
| Silicone prostheses using a 3D printer Braun, Christoph (DE) | stamos + braun prothesenwerk gmbh Stamos, Alexander (DE) | stamos + braun prothesenwerk GmbH |
|
| Innovations in material technology with prepreg Wengert, Hans-Peter (DE) | HACOTECH GmbH |
|
